Marshall DSL100HR 100 Watt Tube Guitar Amplifier Head with 2 Channels (Each with 2 Modes)
Used by history's most iconic musicians, everyone dreams of owning a high-powered Marshall amplifier stack. To fulfill the dreams of more and more guitar players, Marshall released the DSL series. All-tube, all-original Marshall amps delivering that legendary Marshall tone; the standard by which all other amplifiers are judged.
The Marshal ... show more
Marshall DSL100HR 100 Watt Tube Guitar Amplifier Head with 2 Channels (Each with 2 Modes)
Share this product
Used by history's most iconic musicians, everyone dreams of owning a high-powered Marshall amplifier stack. To fulfill the dreams of more and more guitar players, Marshall released the DSL series. All-tube, all-original Marshall amps delivering that legendary Marshall tone; the standard by which all other amplifiers are judged.
The Marshall DSL100HR is a 100-watt all-tube head. With four 12AX7 (ECC83) tubes in the preamp and four EL34 tubes in power section, expect clear, rounded clean tones, and of course, roaring and screaming rock distortion as we all know it. Speaking of distortion, you have three gain modes to choose from: Crunch Mode for good ol' rock n' roll, OD1 for arena rock, and (OD2) for that saturated heavy metal sound.
On top of its very responsive 3-band EQ, the DSL100 also has Resonance and Presence controls to fine-tune the low end resonance as well as the upper mids and treble. There is also a Tone Shift button, which when engaged, reconfigures the pre-amp mid frequencies making DSL ideal for contemporary metal tones,especially when combined with higher gain settings.
For added flexibility, the DSL100 also has onboard digital Reverb for added depth, as well as an effects loop to integrate your pedal setup. You can also connect an external MIDI controller (sold separately) to allow remote control of some front panel functions. For studio works or rehearsals, you can also bring the output power down to a more manageable 50 watts.
For just about half the price of its other Marshall brothers, the DSL100HR Amp, owning a 100-watt Marshall is no longer a distant dream for the working guitarist.
DSL100HR 100 Watt Tube Guitar Amplifier Head With 2 Channels (Each With 2 Modes) from Marshall is 100% original and brand new. We, at Melody House take pride in our after sales service and support. For further details on the DSL100HR 100 Watt Tube Guitar Amplifier Head With 2 Channels (Each With 2 Modes), Marshall, simply write to us to consult an expert or order online and we will take care of the rest. Happy Shopping!
Type | Head |
Wattage | 100 / 50 watts (switchable) |
Channels | 2 (Classic and Ultra), each with 2 modes |
Tubes | 4 x ECC83 (preamp), 4 x EL34 (power amp) |
Controls | Loop On/Off, Master Volume 2, Master Volume 1, Master Select, Reverb x 2 (for Ultra and Classic), Resonance, Presence, Tone Shift, Bass, Middle, Treble, OD1/OD2 switch, Volume & Gain (Ultra), Volume & Gain (Classic), Clean/Crunch switch |
Output Impedance | 4, 8, and 16 ohms |
Effects Loop | Yes |
Inputs | Guitar input (1/4"), Audio input (1/8"), MIDI in, Footswitch in |
Outputs | 1/4" Speaker Outs (1 x 16 ohms, 1 x 8 / 2 x 16 ohms, 1 x 4 ohms / 2 x 8 ohms), 1/4" Emulated Line Out |
Dimensions | (HxWxD) 10.8 x 29.1 x 9.5 inches |
Weight | 24.2 kg |
Included | 2-button footswitch (PEDL-90012) |
- Be the first to review this product
WRITE YOUR OWN REVIEW
How do you rate this product? *